General Pump MW Repair Manual - Manual (Page 38)

GENERAL PUMP
A member of the Interpump Group
MW/S SERIES
Page 38
Extract the outlet valve unit with the use of an extractor hammer (#F27516400) to be applied on the M10
hole of the valve guide (1, fig. 136).
Unscrew the 8 M16 x 45 screws of the suction valve cover (1, fig. 137) and remove the cover (1, fig. 138).
Extract the suction valve unit with the use of an extractor hammer (#F27516400) to be applied on the M10
hole of the valve guide (1, fig. 139).
Ref 300791 Rev.C
11-12