General Pump MW Repair Manual - Manual (Page 11)

GENERAL PUMP
A member of the Interpump Group
MW/S SERIES
Position the 3 grub screws or M8 threaded screws (1, fig. 28) with the function of extractors in the holes.
Remove the crankshaft from the PTO side (1, fig. 31)
Slowly screw in the 3 M8 screws (1, fig. 29) to prevent the cover from tilting too far and getting locked in the
housing. Remove the bearing cover while supporting the shaft to prevent damage (1, fig. 30).
Page 11
Ref 300791 Rev.C
11-12