General Pump MW Repair Manual - Manual (Page 4)

GENERAL PUMP
A member of the Interpump Group
MW/S SERIES
Page 4
2.1.1 Disassembly of Mechanical Parts
The correct sequence is the following:
Completely drain the oil from the pump, then disassemble the casing cover (and relative o-ring), unscrewing
the 6 M10 screws (1, fig. 2).
Remove the tab from the PTO shaft (2, fig. 3).
Unscrew the reduction gear cover fixing screws (1, fig. 4).
Ref 300791 Rev.C
11-12