Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 155)

Remote Operation Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 155
8.1.6. MACHINE ID
Each type of Teledyne’s analyzer is configured with a default ID code.
 The default ID code for the GFC 7001E/EM Analyzers is 300.
The ID number is only important if more than one analyzer is connected to the same communications channel
such as when several analyzers are:
 On the same Ethernet LAN (see Section 8.4);
 in a RS-232 multidrop chain (see Section 8.2) or;
 operating over a RS-485 network (See Section 8.3).
If two analyzers of the same model type are used on one channel, the ID codes of one or both of the instruments
needs to be changed.
To edit the instrument’s ID code, press:
The ID can also be used for to identify any one of several analyzers attached to the same network but situated in
different physical locations.