Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 126)

Advanced Features Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 126
To access and navigate the VARS menu, use the following key sequence.
PREV JUMP EDIT ENTR EXIT
ENTR EXIT
Enter sign and number of
seconds per day the clock
gains (-) or loses(+).
SETUP X.X
SETUP X.X
Toggle this key to turn the
Dynamic Zero calibration
feature
Concentration display
continuously cycles
through all gasses.
SETUP X.X
PREV JUMP PRNT EXIT
SETUP X.X
CFG DAS RNGE PASS CLK EXIT
SETUP X.X
COMM DIAG EXIT
SETUP X.X
EXIT
Toggle these
keys to enter the
correct
In all cases:
discards the new
setting.
accepts the
new setting.
SETUP X.X
PREV JUMP PRNT EXIT
SETUP X.X
PREV JUMP PRNT EXIT
SETUP X.X
Toggle these keys to set
the iDAS HOLDOFF time
period in minutes
(MAX = 20 minutes).
Toggle this key to turn the
Dynamic Span calibration
feature
SETUP X.X
PREV JUMP PRNT EXIT
SETUP X.X
SETUP X.X
PREV JUMP PRNT EXIT
SETUP X.X
Use these keys to select
which gas will be reported
by the sTABIL test
function.
(O
2
is only available if the
optional O
2
sensor is
installed)
Use these Keys to select
the precision of the o33
concentration display.
Press for additional
VARS; press or
to move back and
forth throughout the list of
VARS.