Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 131)

Advanced Features Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 131
7.4.2. ANALOG OUTPUT VOLTAGE / CURRENT RANGE SELECTION
In its standard configuration, each of the analog outputs is set to output a 0–5 VDC signals. Several other output
ranges are available. Each range has is usable from -5% to + 5% of the rated span.
Table 7-7: Analog Output Voltage Range Min/Max
RANGE NAME RANGE SPAN MINIMUM OUTPUT MAXIMUM OUTPUT
0.1V 0-100 mVDC -5 mVDC 105 mVDC
1V 0-1 VDC -0.05 VDC 1.05 VDC
5V 0-5 VDC -0.25 VDC 5.25 VDC
10V 0-10 VDC -0.5 VDC 10.5 VDC
 The default offset for all VDC ranges is 0-5 VDC.
CURR 0-20 mA 0 mA 20 mA
 While these are the physical limits of the current loop modules, typical applications use 2-20 or 4-20 mA for the lower and
upper limits. Please specify desired range when ordering this option.
 The default offset for all current ranges is 0 mA.
 Current outputs are available only on A1-A3.