Teledyne GFC-7001E - Trace CO Analyzer - Manual (Page 121)

Advanced Features Model GFC7001E Carbon Dioxide Analyzer
Teledyne Analytical Instruments 121
7.1.5.8. Enabling/Disabling the HOLDOFF Feature
The iDAS HOLDOFF feature prevents data collection during calibration operations and at certain times when
the quality of the analyzer’s CO measurements may not be certain (e.g. while the instrument is warming up). In
this case, the length of time that the HOLDOFF feature is active is determined by the value of the internal
variable (VARS), DAS_HOLDOFF.
To set the length of the DAS_HOLDOFF period, see Section Error! Reference source not found..
To enable or disable the HOLDOFF, follow the instruction shown in Section 7.1.5 then press: