Teledyne 9110AH - Nitrogen oxides analyzer - Manual (Page 74)

TELEDYNE Model 9110AH NO
X
Analyzer Operator Manual, 01620, Rev. F
5-32
Table 5-14: RS-232 Interface Command Types
First Character Message Type
C Calibration status
D Diagnostic
R DAS report
T Test measurement
V Variable
W Warning
There are 6 different types of messages output by the M9110AH. They are grouped below by
type in Table 5-15 – Table 5-19. The meanings of the various messages are discussed elsewhere
in the manual. The TEST, DIAGNOSTIC and WARNING messages are discussed in Sections
9.1.1, 9.1.2, 9.1.3. DAS and VARIABLES are discussed in Sections 5.3.3 and 5.3.9.
CALIBRATE is discussed in Section 7.