Teledyne 9110AH - Nitrogen oxides analyzer - Manual (Page 49)

TELEDYNE Model 9110AH NO
X
Analyzer Operator Manual, 01620, Rev. F
5-7
Table 5-3: M9110AH Setup Menu
Level 1 Level 2 Level 3 Level 4 Level 5 Description
Reference
Section
DAS Data Acquisition menu 5.3.3
VIEW Select which DAS data collector to view 5.3.3
PREV-
NEXT Scroll through data collectors CONC,
PNUMTC, CAL DAT
EDIT UP Examine the DAS data buffer
UP10 Move UP 10 averages in the DAS data
buffer
DOWN Examine the DAS data buffer - move
down and display next average
DOWN10 Move DOWN 10 averages in the DAS
data buffer
RANGE Sets the output range 5.3.4
MODE Type of range output 5.3.4
SING All 3 outputs are on the same single range 5.3.4.1
AUTO All 3 outputs AutoRange between 2
different ranges 5.3.4.2
REM Same as AutoRange, except external
contacts set range 5.3.4.2
IND Each range can be set independently 5.3.4.3
OFFS Allows a offset bias voltage to all analog
output channels 5.3.6
UNIT Unit selection menu 5.3.4.5
PPM Selects PPM units 5.3.4.5
MGM Selects milligrams per cubic meter units 5.3.4.5
SET
IF
SINGLE SET Sets the range of the instrument if in
SINGLE range mode 5.3.4.1
IF
AUTO
OR REM LO/HI Sets the low and high ranges for
AUTORANGE or Remote Range. 5.3.4.2
IF
INDEP NO NOX
NO2 Sets each INDEPENDENT range.
DIL Sets dilution factor. 5.3.4.4