beautypg.com

For your safety, Safety instructions for this appliance, Overview – Bosch MUZXLVE1 VitalEmotion pour les maîtres du pain le kit VitalEmotion est composé dun moulin à céréales dun mini-hachoir Multi-mixer et de 3 disques User Manual

Page 7: Overload protection

background image

Robert Bosch Hausgeräte GmbH

7

For your safety

This accessory is designed for the food processor MUM8.../MUMXL.. .

Follow the operating instructions for the food processor.

The mill is suitable for grinding all types of grain (except maize), poppy

seeds, linseeds, sesame, buckwheat, etc. Even herbs, spices and

coffee can be ground. The ingredients must be dry. It must not be used

for processing other objects or substances.

,

Safety instructions for this appliance

Risk of injury!

Keep fingers out of the filling container. Do not insert any objects into

the filling container.

Do not attach or remove the mill until the drive is at a standstill and

the mains plug has been pulled out.

Important!

The accessories must be completely assembled before use.

Operate the accessories in the indicated operating position only.

Never assemble the mill on the base unit.

Please use a clean mill only, otherwise it could be damaged by metal

parts, sand or stones.

Do not operate the mill without any ingredients.

Never immerse individual parts (except filling container) in liquids,

never hold under running water and do not clean in the dishwasher.

Overview

Please fold out the illustrated pages.

Fig. 

1 Casing

2 Setting ring

3 Grinding cone

4 Grinding ring

5 Filling container

6 Drive coupling

7 Discharge chute

Fig. 

Operating position

Overload protection

An installed predetermined breaking point

protects the drive. The drive coupling (6)

will break if an overload occurs (e.g. damp

grain or foreign objects in the grinder).

A replacement drive coupling is available

from a dealer or customer service

(order no. 031003).

The drive coupling can easily be removed

and replaced.

Fig. 

Take hold of or clamp the grinding cone

and rotate the setting ring all the way

to the right.

Using flat nose pliers, grip the hexagon

flats on the drive coupling, turn it to the

right and pull out (bayonet lock).

en