Diamond Products FZ - Manual (Page 6)

Safe areas for the operating
personnel and other people
The machine is designed to be operated by one single person.
During machining other people are to stay whithin safe distance.
The controls of the power unit or the remote control must be easily
reachable during machining.
An emergency stop must be possible at any time (see "Emergency
stop").
1.3 During sawing
Use only the screws specified for this purpose and meeting the
prescribed length and quality requirements!
Never use saw blades with cracks! Cracked saw blades can brake
during sawing and endanger people.
Power feed
Machines with power feed are not automatic machines. They have
to be observed during machining. An emergency stop must be
feasable at any time.
Rotating and moving parts
To prevent of being caught by rotating or moving parts wear
tight-fitting clothes and a hear-net in the case of long hear!
1.4 After machining
Electric power units
Unplug the mains right after machining in order to prevent unin-
tentional switching-on of the power unit!
Removing cutouts and drilling cores
Use appropriate lifting gear in order to prevent injuries!
Safety instructions FZ
Page 6 FZ30494E