Diamond Products FZ - Manual (Page 4)

1 Safety instructions
1.1 Fundamentals
Qualification of operating personnel
Machining concrete and stone is neither simple nor without dan-
ger. High material assets on the job site, the machine itself and
the safety of people are at stake.
The personnel has to be trained by experienced experts.
HYDROSTRESS can support you in your training efforts.
Read the manual and inform your
work-fellows!
This manual contains important information in order to operate the
machine safely and efficiently.
The owner of the machine must make sure that the instructions in
this manual are followed by any person having to do with the
machine, its equipment or its auxiliary material.
The manual must be accessible on the job site at any time.
Hazards on the building-site
The machine/plant has been built in accordance with state-of-the-
art standards and the recognized safety rules. Nevertheless, its
use may constitute a risk to life and limb of the user or of third
parties, or cause damage to the machine and to other material
property.
Pay attention to the special working conditions on the building-site.
Protect yourself and others within your responsability against the
manifold hazards!
Recognize warnings!
Pay attention to the following words, their characteristics and their
meaning:
Danger:
Orders or prohibitions designed
to prevent injury
Attention:
Information designed to prevent damage
Important:
Information on how to use the machine
most efficiently.
Noise (noise level)
Depending on the working environment the machine can cause
excessive noise.
The noise can harm the hearing of operating personnel and of
other people nearby quickly.
Ear protectors must therefore always be worn during machining.
Safety clothing
Safety clothing must always be worn when machining concrete or
stone in order to beware of the following hazards:
Safety instructions FZ
Page 4 FZ30494E