Diamond Products FZ - Manual (Page 15)

Position of cuts
Inform yourself about the concrete to be cut.
– Where is the reinforcement?
– Is the concrete heavily or lightly rein-
forced?
– Is it suitable for dowel fixing?
Determine both the position and the sequence of the cuts prior to
starting operation. In case of a door cutout, e.g. first carry out the
cut at the bottom, then the lateral cuts, and finally the cut on top.
If possible, cut in perpendicular direction
to the reinforcement.
Non-observance of the cutting sequence indicated may lead to
blocking the blade or to damages to the system.
Length of tracks
Determine the track length for the cut to be carried out. Allow for
sufficient excess length for the wall saw head.
FZ Set-up
FZ30494E Page 15