Diamond Products FZ - Manual (Page 33)

8.2 Checking tension of toothed belt
1) Remove the rubber seal of the blade
flange
2) Remove the belt cover
3) Check the tension
8.3 Tensioning the toothed belt
1) Loosen 8 Screws (1)
2) Turn screw (2) with fork wrench until
tension is correct
3) Fasten all 8 Screws (1).
4) Mount rubber seal and belt cover
8.4 Replacing guiding devices
Fig. fz7-1a.tif
Fig. fz7-1c.tif
Fig. fz7-3b.tif
Fig. fz7-2.tif
FZ Maintenance
FZ30494E Page 33