Micromod Micro-DCI: 53HC2600 LoopMaster SL6000 CONFIGURATION TOOLKIT - Manual (Page 36)

53HC2600 INSTRUCTION MANUAL
28 Guided Tour
1. Click on the C Scheme button to open the Control Scheme dialog. This dialog shows the
selected control scheme, control switches, and a graphical representation of the Control
Scheme block (
Figure 3-12 ).
2. Since the current control scheme is Cascade Control, both cn1 and cn2 loops are shown. To
configure the control output of cn1, click on Output1 to display the SAMPLE.cn1.Output1
dialog (
Figure 3-13 ).
3. The SAMPLE.cn1.Output1 dialog shows the Output Parameters. The yellow box (at the top of
the window) is an interactive training screen, and the parameters are shown in the Output
Figure 3-12. Sample Control Scheme Window
Figure 3-13. SAMPLE.cn1.Output1 Dialog Window