Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 96)

View Sample Details
1. Open the Results page and then open the Saved Batches tab.
2. Click Saved Batches, then click the batch for which you want to view details.
3. Click Open, then click Sample Details. The Sample Details tab opens. If you are using
an LIS licensed package of the software, click Transmit to transmit sample details to the
LIS database. You can transmit either a single analyte per sample or the entire sample.
View and Print Reports
The Luminex xPONENT software can format your batch or multi-batch results in a variety of
export formats and provide different types of information in different types of reports. Three
types of reports are available. See
Reports Tab for a description of available reports.
NOTE: Install the printer before initiating the Print command.
1. Open the Results page, then open the Reports tab.
2. In the Report list, click the report you want to view.
3. In the Type list, select the report type you want to view.
4. Select the item for which you want to generate the report. If you are creating a batch
report, select the analyte to include in the report.
5. Click Generate. The report displays in the lower part of the Reports tab.
6. Click Print to print the report, or Save to save the report as a .pdf file.
Transmit Batch
You can only perform this task if you are using an xPONENT package licensed for LIS.
1. Open the Results page, then open the LIS Results tab.
2. Select a batch, then click Open.
3. Click Yes to approve and transmit the batch to the LIS database.
Using Protocols, Lots, and Kits
Protocols
Protocols for your assay are provided with your assay kit.
WARNING: Human and animal samples may contain biohazardous
infectious agents. Where exposure (including aerosol) to
potentially biohazardous material exists, follow appropriate
biosafety procedures and use personal protective equipment,
such as gloves, gowns, laboratory coats, face shields, or mask
and eye protection, and ventilation devices. Observe all local,
state, and federal biohazard handling regulations when
disposing of biohazardous waste material.
xPONENT ® 3.1 Rev. 2 Software User Manual
86
For In Vitro Diagnostic Use