Samples – Luminex xPONENT 3.1 Rev 2 (IVD) User Manual
Page 22

• Probe and Heater - Opens the Probe and Heater tab on the Maintenance page. For
more information about this tab, see
.
• Sys Info - Opens the System Info tab of the Maintenance page. For more information,
see
.
• Reports - Opens the Reports tab of the Results page. For more information, see
.
Samples
Use this page to create new samples, view the details of a sample list, or to create a new
batch. Samples can also be added via a Lab Information System (LIS), if your software is
licensed for a LIS.
This page contains the following tabs:
• Create Sample - Displays when the Create New Samples button is clicked.
• Edit Samples - Displays when the Details button is clicked.
• Protocol - Displays when the Create Batch button is clicked.
• Stds & Ctrls - Displays when the Create Batch button is clicked.
• Plate Layout - Displays when the Create Batch button is clicked.
FIGURE 4.
Samples Tab
This tab contains the following:
• Create New Samples - Opens the Create Sample tab.
xPONENT
®
3.1 Rev. 2 Software User Manual
12
For In Vitro Diagnostic Use