Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 23)

• Sample Lists - Contains a list of protocols, including the version number and the number
of samples associated with each protocol.
• Details - Opens the Edit Samples tab to view or edit sample details for the selected
protocol.
• Create Batch - Opens the Protocol tab to create a batch.
Create Sample Tab
Use this tab to type and view sample information.
FIGURE 5. Create Sample Tab
This tab contains the following:
• Protocol - Displays the protocol selected in the Samples tab. If xPONENT has an LIS
license enabled, any sample details provided by the LIS also appear in the Sample list.
• Version - Displays the protocol version number. It is not editable.
• Sample - If you have the LIS-enabled version of the software and are currently connected
to the LIS, the sample list autopopulates when the LIS provides samples orders. You can
only view or run a sample list created in the LIS; you cannot edit it. Otherwise, use Create
New Samples to create a new sample. Once you have typed and saved the sample
information, it appears in the list to the left. This list displays the samples you have already
created. To reorder the sample’s acquisition location, use the move arrows.
The following Delete, New, Edit, and Undo buttons only display depending on actions taken
in the Create Sample tab.
• Delete - Deletes a highlighted sample.
For In Vitro Diagnostic Use Touring the Software
13