Continued – Luminex xPONENT 3.1 Rev 2 (IVD) User Manual
Page 104

Term
Definition
bead map
A collection of bead sets with defined
classification coordinates.
bead set
A set of xMAP microspheres that have a uniquely
identifiable ratio of two classification dyes. The
unique ratio is identified by a unique spectral
address. Also sometimes called microsphere set,
microsphere region, or test by the software during
acquisition.
calibration
A process used to normalize the settings for the
reporter channel, both classification channels,
and the doublet discriminator channel for the
Luminex System. Calibration ensures optimal and
consistent microsphere classifications and
reporter readings.
calibrators
xMAP microspheres used to normalize the
settings for the reporter channel, both
classification channels, and the doublet
discriminator channel for the Luminex System.
CL1
Refers to dyes embedded in the microsphere.
Also see classification channel.
CL1 Target
Used for calibration purposes. This is the target
value for the Classification Channel 1 for the
CAL1 microspheres.
CL2
Refers to dyes embedded in the microsphere.
Also see classification channel.
CL2 Target
Used for calibration purposes. This is the target
value for the Classification Channel 2 for the
CAL1 microspheres.
classification channel
A specific range of wavelengths in which light
intensity is measured. Includes the fluorescence
emission of a given classification dye.
Classification channels are abbreviated as CL1
and CL2.
CSV
Comma separated value file format used to output
data from the application.
cuvette
Fluid pathway within the optics component of the
system through which the sample is read.
data reduction
The analysis of acquired batch data.
DD temperature
The current temperature of the doublet
discriminator avalanche photo diode.
delta cal temperature
The difference between the current temperature
of the Doublet Discriminator APD and its
temperature at your last calibration. Once the
delta cal temperature exceeds +/- 3ºC, the system
must be recalibrated.
TABLE .
Continued
xPONENT
®
3.1 Rev. 2 Software User Manual
94
For In Vitro Diagnostic Use