Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 88)

8. Click Print to print the report, or Save to save the report.
9. Click New Report to generate another report.
Managing Sample Lists
Use the Samples page to create a sample list, view or edit sample list details, or create a
batch.
Create New Sample List
1. Open the Samples page.
2. In the Sample Lists section, select the protocol you are using for the sample list, then
click Create New Samples. The Create Sample tab opens.
3. In the ID box, type the sample ID
4. Type a patient first name in the First name box if desired.
5. Type a patient last name in the Last name box if desired.
6. To add a comment about the sample, type it in the Comment box; this is optional.
7. Click Save to add the sample to the Sample list.
8. To add more samples, click New. Repeat Steps 3-7 until you have added all of the
samples you want in your samples list.
9. Once you have added the all desired samples, click Close.
NOTE: Samples can also be added via a LIS if your software is licensed for
LIS.
Edit Sample Lists
1. Open the Samples page.
2. In the Samples Lists section, choose the protocol you want to edit, then click Details.
The Edit Samples tab opens.
NOTE: If the number in the Number of Samples column is 0, there are no
samples attached to the protocol.
3. Click a sample, then use the Move arrows to move it up or down in the sample list,
changing the order in which they will be acquired.
4. To add a new sample to the list, click New, then follow steps 3-7 in “Create New Sample
List” above.
5. To edit an existing sample, click the sample, then click Edit.
6. Once you have completed editing the sample list, click Close.
Setting Up Batches
A batch consists of a group of samples processed under control of a protocol. Batches
consist of protocols and samples for acquisition and can span more than one plate. Protocols
contain predefined commands that must be included in every batch acquisition.
xPONENT ® 3.1 Rev. 2 Software User Manual
78
For In Vitro Diagnostic Use