Luminex 100 User Manual Version 1.7 - Manual (Page 59)

x MAP Technology Data Acquisition
PN 89-00002-00-063 Rev. A 6 - 9
3. Use the settings shown or modify them, then highlight the first
vacant sample.
4. Click Start to collect the new data; it is added to the established
session.
Open an Existing Session
and Save it as a New
Session ‹ To open an existing session and save it as a new session:
1. Click Open on the toolbar.
2. Choose the session folder and click OK. The established session
appears.
3. Click File on the main menu bar and select Save As, then
rename your session. Use the settings shown or modify the
settings.
4. If you want to keep the settings, but not the data, click the Clear
All button.
5. Click Start to collect data for the new session.
Templates
Templates contain customized session settings: numbers of events
desired, numbers of runs, panel settings, gates, and other session
information. You can quickly apply these commonly-used settings to
a new session. Templates do not store data, and do not store older
calibration settings. Any session you create from a template contains
the current calibration settings.
This section explains how to create, modify, and delete templates.
Create a Template
‹ To create a template:
1. Open an existing session or create a new session.
2. Make desired setting changes. See “Session Settings” on page 6-
14.
3. Click Edit on the main menu bar and select Create Template.
When prompted, supply a name for this template. The software
saves the template in the Templates folder.
Modify a Template
‹ To modify a template:
1. Create a new session from the template that you want to modify.
Default templates cannot be changed.