Luminex 100 User Manual Version 1.7 - Manual (Page 22)

Luminex 100 User Manual Version 1.7 x MAP Technology
2 - 6 PN 89-00002-00-063 Rev. A
This label appears on the back panel of the Luminex 100 analyzer:
Figure 2-8. Laser Caution Label
Do not remove the analyzer cover. When performing routine
maintenance, ensure that power to the analyzer is OFF and the power
cord is disconnected.
All laser apertures in the analyzer are contained within a protective
housing. This label appears on the optics cover within the Luminex
100 analyzer.
Figure 2-9. Laser Caution Label on Optics Cover
This label appears above the laser apertures located inside the optics
enclosure inside the Luminex 100 analyzer.