Laurel Electronics LAUREATE SERIES 2 COUNTER-TIMER-SERIAL INPUT METER - Manual (Page 24)

24
SETUP OF COUNTERS WITH DUAL CHANNEL PULSE SIGNAL CONDITIONER
If the MENU key does not work, see Section 9 “Enabling & Locking Out Menu Items.”
Menus are dynamic. Menu items will only appear if appropriate for previously made menu
selections. For example, Batch menu items will only appear if “Batch” was selected under
“Rate.” Extended counter items will only appear if “Extended” was selected under “Config.”
Press
Menu Press Digit
Select Key Press Value Select
Key
_ InPut
Input
__rAtE Rate modes A__b__ Rate for Channel A (Item #1). Rate for
Channel B (Item #2).
B
a
s
ic
A
_
OnLy Rate for Channel A only (Item #1).
_bAtCH Batch control mode. Batch total (Item #1).
Grand total or number of batches (Item #2). Fill rate
(Item #3).
A_Atot . Rate for Channel A (Item #1). Total for
Channel A (Item #2).
A_btot . Rate for Channel A (Item #1). Total for
Channel B (Item #2).
_A_+_b Sum of rates A & B (Item #1). Rate A
(Item #2). Rate B (Item #3).
_A_− − − −_b Difference of rates A and B (Item #1). Rate
A (Item #2). Rate B (Item #3).
_A_._b . Product of rates A and B (Item #1). Rate A
(Item #2). Rate B (Item #3).
_A_/_b . Rate A divided by rate B (Item #1). Rate A
(Item #2). Rate B (Item #3).
E
x
te
n
d
e
d
m
e
te
r
o
n
ly
_A/b− − − −1
. Draw, rate A / rate B -1 (Item #1). Rate A
(Item #2). Rate B (Item #3).
A__b__ Period Channel A (Item #1). Period for
Channel B (Item #2).
B
a
s
ic
A_OnLy Period for Channel A only (Item #1).
_A_+_b Sum of periods A and B (Item #1). Period
A (Item #2). Period B (Item #3).
_A_-_b . Difference of periods A and B (Item #1).
Period A (Item #2). Period B (Item #3).
_A_._b . Product of periods A and B (Item #1).
Period A (Item #2). Period B (Item #3).
Period
Period modes
E
x
te
n
d
e
d
m
e
te
r
o
n
ly
_A_/_b . Ratio, period A divided by period B (Item
#1). Period A (Item #2). Period B (Item #3).