Impulse 463N - Manual (Page 80)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 80
A copy of these instructions is included with the SeaI/O-463 module and can also be downloaded
from the SeaI/O-463 product page on the Sealevel website.
Do not perform these instructions with the power connected. Be sure to follow proper ESD
procedures by grounding yourself and the SeaI/O module.
 SeaI/O-463 module
 Phillips head screwdriver
 Slotted screwdriver
 50-pin IDC ribbon cable* (up to four)
 CA167 – 40” IDC 50-pin to IDC 50-pin ribbon cable
 CA197 – 18” IDC 50-pin to IDC 50-pin ribbon cable
 CA135 – 40” IDC 50-pin to 50-pin edge connector ribbon cable