Impulse 463N - Manual (Page 66)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 66
using the steps described at the beginning of this section. Depending on the country used, it
may take several reset cycles to get the unit back to a channel valid for your region. Use the
Wireless Configuration window to change channels, if possible.
The Key Encoding method can be either a Passphrase or a Hexadecimal Key, if using a WEP
variant. If you are using a WPA variant, then the Key Encoding method is Passphrase.
Different security encryption methods require different Network Key types and lengths. The
different key types and lengths are displayed below:
WEP 64-bit 10 character hexadecimal key or up to 32 character passphrase
WEP 128-bit 26 character hexadecimal key or up to 32 character passphrase
WPA up to 64 character passphrase
WPA2 up to 64 character passphrase