Impulse 463N - Manual (Page 33)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 33
The SeaI/O-540 provides 32 open-collector outputs. Each open-collector output circuit includes
a flyback diode for protection when interfacing highly inductive loads, such as DC motors.
Outputs are grouped into four eight-bit ports which share high and low voltage contacts via
3.5mm terminal blocks.
USE EXTREME CAUTION!
High voltages will be present on the SeaI/O family of products when high voltage is
connected. Never handle the printed circuit board when high voltage signals are connected
to the board.
Outputs
Type 32 High-Current Open-collector Outputs
Isolation 2500VAC RMS / 3500VDC
Power DC 60W max.
Contact Voltage 60VDC max.
Contact Current
Contact Current
1000mA max. (single output)
2000mA max. (all outputs per port)
Environmental
Operating Temperature -25  C to +85  C (-13  F to 185  F)
Humidity 10% to 90% RH (non-condensing)