Impulse 463N User Manual

Page 69

Text mode
Original mode

©Sealevel Systems, Inc.
SL9049 - 11/2010

SeaI/O Manual

Start MaxSSD (Start  All Programs  Sealevel SeaMAX  MaxSSD) and select Ethernet in the
drop down box. Verify that the IP Address for the wireless SeaI/O module appears in the right
hand pane.

Choose the correct IP Address (if more than one is listed) and click the “SeaI/O Configuration”
tab. Use the drop down box to select the appropriate Slave ID (default is 247) and the click the
“Get SeaI/O Module Settings” button. You will see the description for the wireless SeaI/O
module appear in the right hand frame.

This manual is related to the following products:

540N 470N 530N 570N 463W 540W 530W 420M 530M 450M 430M 440M 540M 462M 463M 520U 420U 530U 450U 430U 440U 540U 462U 463U 520S 420S 410S 450S 430S 540S