Impulse 463N - Manual (Page 58)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 58
The Wireless Network Connection window will now display “Limited or no connectivity” next to
the “SL_Recovery” network connection. All wireless SeaI/O modules are shipped with DHCP
enabled. When you first connect a wireless SeaI/O module to the network, the status LEDs on
the front of the module will blink while it searches for a DHCP server.
Since “SL_Recovery” is an Ad hoc point-to-point network and not on the same network as any
available DHCP servers, the SeaI/O module will not be able to complete the connection.
Close the Wireless Network Connection utility (you will still be directly connected to
“SL_Recovery”).