Seamax software installation – Impulse 463N User Manual
Page 37
©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual
37
Proceed with installing the SeaMAX Software Suite using the software disk that was included with
your Sealevel I/O module. Software drivers are also available on the product webpage on the
Sealevel website at
Do not connect the I/O module to the host until the software is installed.
To install Sealevel Systems software, you must log in as an administrator or have
administrator privileges in Windows.
1. Insert the Sealevel Systems disk in to your optical drive.
2. If „AutoRun‟ is enabled for this drive the software will automatically launch.
3. Otherwise, navigate to the root directory of your optical drive and double-click the
„autorun.exe‟ application to launch the installation window.
4. Select „Install‟.