Impulse 463N User Manual
Page 72
©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual
72
Channel
Frequency
(GHz)
North
America
Europe
Japan
France
Spain
1
2.412
OK
OK
OK
No
No
2
2.417
OK
OK
OK
No
No
3
2.422
OK
OK
OK
No
No
4
2.427
OK
OK
OK
No
No
5
2.432
OK
OK
OK
No
No
6
2.437
OK
OK
OK
No
No
7
2.442
OK
OK
OK
No
No
8
2.447
OK
OK
OK
No
No
9
2.452
OK
OK
OK
No
No
10
2.457
OK
OK
OK
OK
OK
11
2.462
OK
OK
OK
OK
OK
12
2.467
No
OK
OK
OK
No
13
2.472
No
OK
OK
OK
No
14
2.484
No
No
802.11b
No
No
This device contains an FCC approved RF module. The transmitter carries FCC ID: R68WIPORTG.
This device has been designed to operate with the antennas listed in the Certificate, and having
a maximum gain of 5 dB. Antennas not included in this list or having a gain greater than 5 dB
are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required
for successful communication.
This module is authorized under limited module approval specified to mobile host
equipment. So, the antenna must be installed such that 20cm is maintained between the
antenna and users.
The transmitter module may not be co-located with any other transmitter or antenna.