Impulse 463N - Manual (Page 103)

©Sealevel Systems, Inc.
SL9049 - 11/2010
SeaI/O Manual 103
100-250VAC @ 2.7A Desktop Power Supply with US Power Cord (Part# TR108-US) (Part#
TR108)
100-250VAC to 24VDC 36W 1.5A “Desktop” Power Supply
with 1.3mm Plug, requires IEC country-specific Power Cord
Expansion and Strap Kit (Part# KT122)
Included with all N-series expansion modules, the KT122
expansion and strap kit has four metal straps, four #4-40
screws, and a CA239 RS-485 interconnect cable. The metal
straps allow you to connect a Relio R1100 system and
multiple SeaI/O modules together in a stack. The CA239
interconnect cable can be used to connect two SeaI/O
modules together via the RJ45 connectors. This provides an
easy method to cascade RS-485 signals, and power and
ground from one module to the next.
Flush Mount Bracket Kit (Part# KT123)
The KT123 flush mount bracket kit is extremely versatile and
can be used to mount Relio R1000 computers and SeaI/O
modules from the top, bottom, or back edge. R1000 systems
and SeaI/O modules can be mounted flat to a tabletop,
underneath a counter, or inside an enclosure. The KT123 can
be used to mount the enclosures flat to a wall, or along the
back edge, similar to DIN-rail mounting options.
Universal Mounting Bracket (VESA) (Part# KT125)
The KT125 universal mounting bracket is a versatile way to
mount SeaI/O data acquisition modules to walls and under
counters. It can also be used as a backpack to mount other
devices to SeaI/O modules and Relio R1000 systems. The
KT125 has holes for both 75mm and 100mm VESA mounting
options. The universal arrangement of slots and holes accept
bolt sizes to M4 and can be used for virtually any mounting
configuration.
DIN Rail Mounting Clips (Part# DR104)
The DR104 DIN rail assembly mounts to the rear of SeaI/O
modules, Relio R1000-series embedded I/O servers, and the
SeaLINK 4103 Ethernet serial adapter. The rugged plastic clip
securely mounts products to all common profiles of 35mm
DIN rail (i.e., Top Hat rail) and is compatible with A-series
mounting rails. For convenient field installation and service,
the DR104 locates Sealevel I/O devices near the industrial
control equipment on the DIN rail.