CTI Products RCD Advanced Client-Server - Manual (Page 98)

MCNConfig Program: Master-Sub Comparator Configuration
98 68-11824-210
3. Assign Display Tables and Define the SubDevices
A. Assign Display Tables
For each receiver in the “Receivers” window, double-click in the Display Table field and select the
proper Display Table Entry as from the following table:
Receivers Display Table
Master Comparator "Master Comparator"
Sub Comparator "Sub Comparator" (for Virtual Comparator)
"Sub Comparator Enhanced" (for Enhanced Virtual Comparator)
B. Assign Sub Devices for each receiver in the Master Comparator
In the “Receivers” window, a “SubDevice” column will be displayed as shown below (only with Master-
Sub features enabled as indicated above).
1. For each receiver of a Master Comparator, double-click its cell in the “SubDevice” column to
display the following “Select SubDevices” window.
2. From the list of available SubDevices on the left side, “Add” the appropriate receivers to the
right side of this window.
3 A: Assign Display Tables for Master & Subs
3 B: Define SubDevices for each receiver in Master comparator