CTI Products RCD Advanced Client-Server - Manual (Page 120)

MCNConfig Program: Triggered Output Actions Option
120 68-11824-210
Building a New Triggered Output Type
New Triggered Output Types are built just like normal Display Tables.
1. Start in the Display Table Window.
2. Right-Click on the top Display
Table tabs and select
Append New Table.
3. Enter the Triggered Output Type (Display Table)
in the Tab Name field.
Set up the number of bits in the
Input Bits field.
Hit OK.
4. Select the States tab on the bottom of the
window.
Enter the Bit Names
Enter the State values, texts and colors
(Add new states by right-clicking and selecting
Append.)
Enable logging if desired.
Do not enter anything in the
Triggers Output Action column. (This is an
output that receives a trigger.)