CTI Products RCD Advanced Client-Server - Manual (Page 151)

151 68-11824-210
MCN Client Program
This is the Client program that runs on remote PCs to display the status of and control the MCN system.
The MCN Client program runs on PCs connected to the MCN Server over an IP network, and thus do
not need their own MCN Network Interface.
Selecting IP Parameters
When you start the MCN Client program for the first time, it will ask for the IP parameters to use to
connect to the MCN Server.
The screen has the following fields:
NICs IP
This is the IP address of the NIC in the Client PC that will talk to the MCN Server PC.
Client Port
This is the IP port on the Client PC that the MCN Server will communicate with.
Server IP
This is the IP address of the MCN Server PC.
Server Port
This is the Port number in the MCN Server PC that the MCN Clients connect to.
Multicast IP
This is the Multicast IP address that the MCN Server PC uses to send the real-time status data.
Data Port
This is the Port number that the MCN Server PC uses to send the real-time status data.