CTI Products RCD Advanced Client-Server - Manual (Page 12)

Introduction
12 68-11824-210
Supported Network Interfaces
The MCN Server program can use the following versions of HIB modules or the PCLTA cards for the
interface between the PC and the MCN network.
HIB-IP Modules Version 110 & up 78K
HIB-232 Modules Version 200 & up 78K (with Rotary address switches on back)
PCLTA-21 Boards Half-Size PCI boards 78K or 1250 versions
Unsupported Network Interfaces
The following older Network Interfaces are not supported with MCN Server
HIB Modules Version 000-199 (without Rotary address switches on back)
PCLTA (original) Full-size ISA bus boards 78K or 1250 versions
Single or dual interfaces
PCLTA-10 Half-size ISA bus boards 78K or 1250 versions
PCLTA-20 Half-size PCI bus boards 78K or 1250 versions
All HIB-232 modules have a unit number of S2-60081-xxx. If the ‘xxx’ number is less than 200 you
have an early version HIB module that is not supported..
Drivers for MCN Server
The PCLTA Interface boards need a software driver to run the MCN Server program.
This will be included with the PCLTA & software package.
The HIB-IP and HIB-232 modules do not need a driver for normal operation of the MCN Server
program.