CTI Products RCD Advanced Client-Server - Manual (Page 62)

62 68-11824-210
Receivers Resource Window
The Receivers Window shows:
The site names for all the receivers in the system.
Input/Output groups for I/O modules
It is based on the modules defined in the Hardware Window.
Fast Navigation in Receiver Window
The Receiver Window is linked to the Hardware Window. Clicking on a module in the Hardware
Window will bring up the first receiver of that module in the Receiver Window.
Each entry in the Receivers Window has the following fields:
NI
Network Interface for this hardware module. This is a read-only field and is defined in the
Hardware window.
Grp:Mod
The MCN Group & Module number for the hardware module. This is a read-only field defined
in the Hardware Window. The order of modules follows the module order in the Hardware
window.
Type
The Module Type (CIB, AIB, IOB Std, IOB 2 Bit, IOB 1 Bit, etc.) for the hardware module.
This is a read-only field that is controlled in the Hardware Window
Channel
The radio channel for the hardware module. Read-only field (defined in Hardware list).
Rx
The Receiver Number for this receiver. This is a sequential number for a particular receiver
within its module. Read-only field. The maximum receiver number in a module is based on the
Bank number in the Hardware list.
Name
Receiver site name (ex: North Tower, VA Hospital, etc.). Free-format text field. Change the
Receiver Name by selecting the cell and typing in the name.
You can also cut & paste descriptions from Excel. See Using the Clipboard from other
Applications on Page 89.