Clear-Com HX System Frames - Manual (Page 62)

7.2 Matrix performance
Specification
Description / Value
Sample Rate
48 kHz
Resolution
24 bit
Frequency Response @ 48 kHz
samplingd
30 Hz – 22 kHz ± 3 dBu
Crosstalk (adjacent channel)
<–70 dBu
Nominal Level
0 dBu
Matrix headroom
18 dBu
Distortion
<0.05 %, @ 0 dBu, 300 Hz to 10 kHz;
<0.1 %, @ 0 dBu, 100 Hz to 20 kHz
Off Noise <–98 dBu relative to +18 dBu,
20 Hz - 22kHz
On Noise
<–83 dB relative to +18 dBu, 20 Hz – 22kHz
Key response, Intra System
<40 ms for audio route
Linked Systems
<60 ms for audio between matrices
Temperature
0 to +40 C, ambient;° -55to +70C, storage ° °
Humidity (Maximum)
90% Non-condensing
Table 20: Matrix performance specification
7.3 Matrix interfaces
Specification
Description / Value
GPI inputs
8 total, opto-isolated
GPI outputs
8 total, isolated relay contacts
GPI connector
25-pin D-Type socket on rear panel
GPO connector
25-pin D-Type socket on rear panel
External GPI-6/RLY-6
RJ-45 connector on rear panel
Network 10/100 Base-T Ethernet
Max. distance; 100m
RJ-45 connector on rear panel
Serial PC RS-232
3.5mm connector on front panel
Baud rate: 57600
Max. distance: 10 meters
Number of ports: 1
Table 21: Matrix interfaces specification
62 Eclipse HX-PiCo User Guide