Clear-Com HX System Frames - Manual (Page 47)

5 Using the Eclipse HX-PiCo
The following chapter describes how to use the Eclipse HX-PiCo front panel controls and menu
system
Tip: It is easier to perform the majority of configuration and management tasks in EHX configuration
software. For more information, see your EHX documentation (including EHX Help).
For an overview of the Eclipse HX-PiCo matrix, see 3 Overview.
5.1 Accessing the Eclipse HX-PiCo menu system
When the Eclipse HX-PiCo is first powered up, the Clear-Com Eclipse HX-PiCo message is displayed
in the display (menu) screen.
To view the main menu, press the Setup / enter rotary control to the right of the display screen.
Scroll to a menu item by turning the rotary control. When the desired menu item is highlighted on
screen, select the item by pressing the Setup / enter rotary control.
Figure 17: Main menu display
Tip: For the location of the display screen and the Setup / enter rotary control, see
Figure 2: Front panel controls and lights.
Note:
The Eclipse HX-PiCo display dims when the unit has not been used for three minutes. Pressing any
key causes the previously displayed screen to reappear.
5.2 Checking port status
To view the current status of the ports, navigate to Main menu > Status > System Ports.
System Ports displays all of the available 36 port connections graphically (as rectangles), together
with their current status.
47 Eclipse HX-PiCo User Guide