Clear-Com HX System Frames - Manual (Page 19)

3.5 EHX configuration software
The Eclipse HX configuration software (EHX) controls the operation of the
connected devices (such as user panels, interface modules and interface frames) by
sending signals to the CPU in the Eclipse HX-PiCo, which then relays the signals to the
devices.
Note:
EHX is also used to configure the Eclipse HX-PiCo. EHX configuration software is
ordered separately.
Configurations (the operating parameters of complete system setups) are usually
created on the external computer that hosts the EHX software. Up to four complete
system configurations can be stored on the Eclipse HX-PiCo, for retrieval and
activation when required.
The external PC that hosts the EHX software can store an almost unlimited number of
complete system configurations (the number is only limited by the available memory
space on the PC). You can download the configurations to the Eclipse HX-PiCo as
required.
EHX runs on the following versions of Windows:
• Microsoft Windows Server 2003 SP2 (32 bit and 64 bit).
• Microsoft Windows Server 2003 R2 (32 bit and 64 bit).
• Microsoft Windows Server 2008 SP2 (32 bit and 64 bit).
• Microsoft Windows Server 2008 R2 (64 bit only).
Note:
Only 64 bit is supported, as Windows Server 2008 R2 is not available for 32 bit.
• Microsoft Windows XP SP3 (32 bit and 64 bit).
• Microsoft Windows Vista SP2 (32 bit and 64 bit).
• Windows 7 (32 bit and 64 bit).
When running EHX on Windows operating systems, the client and server can run on
separate machines connected over a network.
Tip: For minimum and recommended PC requirements, see:
• 7.5
Minimum PC requirements (for EHX software) .
• 7.6
Recommended PC requirements (for EHX software) .
You can use EHX to perform a wide range of configuration tasks, including:
19 Eclipse HX-PiCo User Guide