Clear-Com HX System Frames - Manual (Page 60)

6 Maintaining the
Eclipse HX-PiCo
This chapter provides guidance on maintaining the Eclipse HX-PiCo.
6.1 Recommended spare parts
To facilitate quick repair of the system with minimum downtime, Clear-Com recommends keeping the
following spare system components in good working condition at all times:
• One of each type of intercom panel in the system.
• One of each type of interface / card in the system.
Due to the complexity of the system, field service generally should be limited to isolating the specific
component of the system with the problem.
6.2 Dual independent power supplies
The Eclipse HX-PiCo matrix includes two internal power supply units. One power supply unit can
power an entire matrix; the second unit provides a backup in case of an equipment failure.
In addition, the two supplies have separate IEC connectors to AC mains power, and are designed for
completely automatic and transparent changeover between supplies in the event of a power failure on
one of the AC branches.
Tip: For more information about the power supplies, see 4.2.1 Powering the Eclipse HX-PiCo.
Servicing instructions (including hardware installation instructions) are for use
by qualified personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that described by this guide, unless qualified
to do so. Refer all servicing to qualified service personnel.
60 Eclipse HX-PiCo User Guide