Clear-Com HX System Frames - Manual (Page 59)

The front panel display always shows the most current on/off status of the GPO, whether it has been
produced by using the front-panel controls or by using the EHX programming software.
To check whether or not a GPO is on and/or to toggle a GPO on/off:
1. From the Main menu, select Status. The Status menu is displayed.
2. From the Status menu, select GPO. The GPO Status menu is displayed.
Figure 28: GPO Status menu display
If a GPO is on an X appears in the checkbox next to that GPO number on the menu. An
unchecked box indicates that a GPO is off.
To toggle a GPO on, scroll to and select its associated checkbox. To toggle a GPO off, clear
its associated checkbox.
3. A screen appears asking for confirmation of the selection. Select Yes to confirm. Select No or
Exit to cancel the changes.
The GPO status menu always shows the current status of the GPO, regardless of whether the
status changes by using the front-panel menu options or by using the EHX programming
software.
4. To exit the menu, scroll to and select Exit.
59 Eclipse HX-PiCo User Guide