GF Signet 8059 External Relay Modules - Manual

Signet 8059 External Relay Module
2. Specifi cations
1. Description
Signet 8059 External Relay Modules supplement the output capabilities of certain host instruments such as Signet 8250 Level
Transmitters. AC-powered versions accept universal line voltage, and also provide 24 VDC output that can be used to power the host
instrument or other device(s). The host instrument controls relay operation by way of a single S
3 L connection. The compact plastic
housing is DIN rail mountable and includes LED annunciators for each relay, plus one each for power-on and data transfer or test
mode.
Input: S 3 L (Signet Sensor Serial Link)
via host instrument
Enclosure
Material:
Noryl ® UL 94 V-O
Type: DIN rail mountable
Electrical connection: Standard screw-type terminals
Shipping weight: 0.37 kg (0.8 lb.)
Power
8059-4AC:
100-240 VAC ± 10%, 50/60 Hz, 20VA
8059-4: 12 to 24 VDC, 100 mA
Add current requirements for external
equipment if using DC output
DC output
8059-4AC:
24 VDC regulated, 300 mA max
8059-4: Pass-through (Input DC less 0.7 VDC)
(12 VDC in = 11.3 VDC out)
Isolation: >5000 Vrms
Relays
Type:
SPDT 250VAC/30VDC @ 5A
Resolution: 2 ms
Response time: < 100 ms
Annunciators: Red LED, 1 per relay
Maximum cable: 400 ft. total S 3 L wiring
WARNING!
• Remove power to unit before wiring input and output connections.
• Do not alter product construction.
• This product should only be used for the purposes
and in the manner described in this manual.
• This unit must be installed on a DIN rail.
Dimensions
Noryl ® is a registered trademark of GE Plastics
100 - 240 V
50/60 Hz, 20 VA
NC C NO
RELAY A
NC C NO
RELAY B
NC C NO
RELAY C
NC C NO
RELAY D
+ S 3 L - + S 3 L -
OUTPUT 24VDC
+ -
AC INPUT INPUT PASS-THRU
L N
COM
32:(5
Signet 3-8059 Relay Module
Test A
Test B
Test C
Test D
Relay A
Relay B
Relay C
Relay D
LISTED
E171559
®
89 mm
(3.5 in.)
57 mm
(2.25 in.)
108 mm
(4.25 in.)
Table of Contents
1. Description
2. Specifi cations
3. Installation
4. Power
5. Wiring
6. Operation
7. Relay
Test
8. Ordering Information
3-8059-4AC version is shown. External dimensions are identical for all versions.
3-8059.090 Rev. G 03/13 English
*3-8059.090*
English
Environmental
Ambient temperature
•
Storage: -20 °C to 85 °C (-4 °F to 185 °F)
• Operating: -10 °C to 55 °C (-14 °F to 130 °F)
Relative humidity: 0 to 90% (non-condensing)
Maximum altitude: 2000 m (6500 ft)
Insulation category: II
Pollution degree: 2
Standards and approvals
•
CE, UL, CUL
• RoHS Compliant
• Manufactured under ISO 9001 for Quality,
ISO 14001 for Environmental Management and
OHSAS 18001 for Occupational Health and Safety.
Declaration of Conformity according to FCC Part 15
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and,
(2) This device must accept any interference received,
including interference that may cause undesired operation.
China RoHS (Go to www.gfsignet.com for details)