Burkert Type 8611 - Manual (Page 6)

6
Authorizeduse
2. auThorized use
non-authorized use of the process controller type 8611
may be a hazard to people, nearby equipment and the
environment.
• The process controller is intended for controlling the process
variables for pressure, temperature or flow-rate in conjunction
with a proportional or process valve and a sensor.
• Do not use the device outdoors.
• Use according to the authorized data, operating conditions and
conditions of use specified in the contract documents and oper-
ating instructions. These are described in the chapter entitled
“Technical Data”.
• The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
• Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
• Use the device only as intended.
2.1. restrictions
If exporting the system/device, observe any existing restrictions.
2.2. Predictable Misuse
• The Type 8611 is not to be used in areas where there is a risk of
explosion.
• Do not physically stress the housing (e.g. by placing objects on it
or standing on it).
english
Type 8611