Burkert Type 8611 - Manual (Page 11)

11
TechnicalData
assembly
Installation position: Any position
Assembly models: Attachment to a pipeline with
Bürkert flow-rate fitting Type
S030
wall assembly, rail assembly,
valve assembly, control cabinet
assembly
Display: 2-line,
(see “Fig. 10: Display
elements”)
Operating voltage: Multipin: 3-pin or / and 4-pin
M8, 8-pin M12
Power cable: 0.5 mm 2 max. cross section,
max. 100 m long, screened
6.4. rating plate description
The rating plate contains important technical data for the specific
device. The structure of the rating plate is described below by way
of example.
6.4.1. rating plate of the controllers for
wall, rail, valve or fitting assembly
8611 Wall 24VDC
00177462
W16LU
SET: Norm ACT: PWM
IN:Norm OUT:Norm
S/N xxxxxx
Sensor input signal
(Norm, Pt 100 or Freq (NPN))
Analog output
(Norm or None)
Controller output signal
(PWM or Norm)
Set-point value input signal
Manufacturer's code
Order part number
Serial number
Power supply voltage
Assembly model
- Wall (wall assembly)
- Rail (rail assembly)
- Valve (assembly directly on valve)
- Fitting (assembly directly on flow-rate fitting)
Controller
type
Example:
Fig. 3: Example: Rating plate of the controllers for wall, rail, valve
or fitting assembly
english
Type 8611