Burkert Type 8611 - Manual (Page 37)

37
ConfigurationLevel
CALI
FILT
Calibration of the analog inputs and outputs
The detailed description of the
CALI function can be found in the Operating Instruction of Type 8611 eCONTROL
The operating instructions can be found on the enclosed CD and on the Internet at:
www.burkert.com Documentation Type
0.01
KFAC * )
FREE
BACK
0.1
1
10
Enter value The display 0.01, 0.1, 1 is used for setting the
decimal place.
Use the display
10 for setting the multiplier 10 for the
K-factor.
Q1 ** )
Q2 ** )
** ) Q1 and Q2 are only displayed if frequency input (FREQ) was selected for both flow-rate sensors in
ratio control.
Selection of K-factor for ratio control
Selection of Bürkert flow-rate sensor
* ) The KFAC menu option is not indicated unless a sensor with frequency input was selected in the
MODE menu.
Fig. 19: Operating structure of the configuration level - 5 of 12
english
Type 8611