Burkert Type 8611 - Manual (Page 27)

27
OperationandFunction
9.2.1. switching between the operating
levels and operating states
The ENTER key is pressed to change the operating level and oper-
ating state (see Fig. 11).
Any changes made within the configuration level are only
stored after returning to the process operating level.
Changes in the Manual operating state can be made while
the controller is running.
Operating state
AUTOMATIK Press button
< 1 s (short)
> 5 s (long)
Configuration
level
MODE
0..... 9
ENTER
O
u t
eCONTROL 8611
MODE
UNIT.
.
.
.
END
Operating
state
HAND
SET
PARA
VALV
TEST
BACK
Process operating level
025.5
L /M
0..... 9
ENTER
O
u t
eCONTROL 8611
Fig. 11: Changing the operating level and operating state
9.3. funktion of the keys
The device is operated using two arrow keys and one ENTER key.
The function of these in respect of the operating level and the oper-
ating state is shown in the table below.
operating
level operating
state
Level 1:
Process
operating
level
AUTO-
MATIC
Switch display
between actual
value, set-point value
and manipulated
variable
• Press key briefly
(< 1 s):
Switches to
operating state
MANUAL
• Press and hold
key (> 5 s):
Switches to
configuration
level
MANUAL
Switches
to the
last
menu
option Switches
to the
next
menu
option
• Selection of
menu option
• Take over
settings
• Switches to
operating state
AUTOMATIC
(for display
BACK)
Entering of values
Increase
value
Change
by one
position
to the left
english
Type 8611