beautypg.com

Burkert Type 8611 User Manual

Page 16

background image

16

Assembly

7.3.1. installation in a control cabinet

• Prepare control panel recess with the dimensions 45mm x 45mm

(corner radius 3mm).

• Place the supplied seal on the housing.
• Insert the controller from the front into the control panel recess.
• From the rear, snap the 4 supplied fastening elements into place

and fasten using a screwdriver.

4 Fastening elements

Seal

Fig. 7: Installation elements

Fig. 8: Installed controller

recommended line cross sections for the control cabinet
model:

Cross
section
min.

Cross
section
max.

Minimum
length

Cross section for
flexible lines

0.2 mm²

1.5 mm²

10 mm
(stripping)

Cross section for
flexible lines with
cable end sleeve
without plastic
sleeve

0.25 mm²

1.5 mm²

10 mm

Cross section for
flexible lines with
cable end sleeve
with plastic sleeve

0.25 mm²

0.75 mm²

10 mm

Tab. 3: Recommended line cross sections

english

Type 8611