Burkert Type 8611 - Manual (Page 28)

28
Functions,ProcessOperatingLevel
operating
level operating
state
Level 2:
Configu-
ration level
Switches
to the
last
menu
option Switches
to the
next
menu
option
• Selection of
menu option
• Take over
settings
• Switches to
process oper-
ating level and
to operating
state AUTO-
MATIC (for
display
END)
Entering of values
Increase
value
Change
by one
position
to the left
Tab. 12: Function of the keys
10. funcTions, Process
oPeraTinG leVel
10.1. operating state auToMaTic
After switching on the operating voltage, the controller is at the process
operating level and in the AUTOMATIC operating state. The normal
control mode is executed and monitored.
10.1.1. displays in the auToMaTic
operating state
Press the arrow keys to switch between 4 different displays for moni-
toring the control operation. Which of these displays should be shown
as start display after applying the operating voltage can be defined in the
DSPL menu (see Operating structure of the configuration level Fig. 26).
english
Type 8611