Cd creation setup general tab, Cd creation setup general tab b-2 – EXP Computer EXP CD-Rewriter Bundled S_W User Manual
Page 106
B-2
Adaptec Easy CD Creator Standard Edition
Adaptec Easy CD Creator Standard Edition
Stock Number: 511446-00, Rev. A
Page: B-2
Print Spec Number: 496513-00
Inside Text:496512-00
Current Date: 5/8/98
Final Review
CD Creation Setup General Tab
The following table list the settings available in the General tab.
Setting
Description
CD-Recorder
Shows the selected CD recorder. If more than one CD-R or
CD-RW drive is connected to your system, you can change
the target recorder in the drop-down list box.
Write Speed
Shows the speed at which the recording will be done.
Change this setting if you want to create the CD at a different
speed. To improve recording performance, you can reduce
the write speed.
Number of Copies
Shows the number of copies to make from the CD layout you
are about to record. If you want more than one copy, type in
the number of copies.
Options:
— Test Only
Select this option to perform a test in which the files to be
recorded are passed to the CD recorder. No actual informa-
tion is recorded to the CD. Use this option if you have made
any changes to your CD recorder setup.
— Test and Create
CD
Select this option to perform a test in which the files to be
recorded are passed to the CD recorder. No actual informa-
tion is recorded to the CD during the test. Recording begins
after a successful test.
This setting is the default option. Each time you create a CD
and you do not want to perform the test, select Create CD.
— Create CD
Select this option when you do not want to perform the test.
This option begins the recording process immediately. Use
this option if you have successfully recorded a number of
CDs and you have not made any changes to your CD
recorder setup.