See chapter, Stingray delay and minimum pulse, Width – ALLIED Vision Technologies Oscar F-810 User Manual
Page 49
Camera interfaces
FireWire Hardware Installation Guide V8.0.0
49
Stingray delay and minimum pulse width
The cycle delay for all Stingray cameras is:
tpdLH
1.0 μs and tpdHL 1.5 μs
The minimum pulse width for all Stingray cameras is:
tp
1.6 μs
Test conditions
The input signal was driven with 12 V and a 2.2 k
pull down resistor to GND.
This manual is related to the following products:
- Oscar F-510 Oscar F-320 Marlin F-201 Marlin F-146 Marlin F-145 Marlin F-080 Marlin F-046 Marlin F-033 Guppy F-503 Guppy F-146 Guppy F-080 Guppy F-046 Guppy F-044 Guppy F-038 Guppy F-036 Guppy F-033 Pike F-1600 Pike F-1100 Pike F-505 Pike F-421 Pike F-210 Pike F-145 Pike F-100 Pike F-032 Stingray F-504 Stingray F-201 Stingray F-146 Stingray F-145 Stingray F-125 Stingray F-080 Stingray F-033 Guppy PRO F-503 Guppy PRO F-201 Guppy PRO F-146 Guppy PRO F-125 Guppy PRO F-095 Guppy PRO F-046 Guppy PRO F-033 Guppy PRO F-032 Guppy PRO F-031